Automated Garden Irrigation Control with Sensors and Actors
To compile and upload the code for an arduino mega 2560 and an ethernet shield please use platformio.
pio run -t uploadall the neccessary libraries will be automatically cloned from github.
| I/O Description | PIN | Remark | Wire Color |
|---|---|---|---|
| SOILFRONT | A13 | Analog | 11 Yellow |
| SOILBACK | A14 | Analog | 12 Orange |
| LEAFSENSOR | A15 | Analog | 08 Pink |
| REL1 | 22 | Output | Blue |
| REL2 | 24 | Output | Green |
| REL3 | 26 | Output | Yellow |
| REL4 | 28 | Output | Orange |
| WATERLEVEL1 | 31 | Pullup | 01 Yellow |
| WATERLEVEL2 | 33 | Pullup | 02 Orange |
| WATERLEVEL3 | 35 | Pullup | 03 Red |
| WATERLEVEL4 | 37 | Pullup | 04 Brown |
| WATERLEVEL5 | 39 | Pullup | 05 Black |
| MOTION | 41 | Floating | 09 Blue |
| DOOR | 43 | Pullup | 07 Grey |
| DALLASPIN | 45 | DS18B20 | 10 Green |
| DHTPIN | 47 | DHT22 | 06 White |
| WATERFONTAIN | 49 | Pullup | Yellow Single |
Left to right 1,2,3,4
| Number | Purpose | Wire colour |
|---|---|---|
| 1 | VCC | Red |
| 2 | Data | Yellow |
| 3 | NC | White |
| 4 | GND | Black |
Numbers are defined by DMX connectors
| Number | Purpose | Wire colour |
|---|---|---|
| 1 | GND | |
| 2 | 5V | |
| 3 | Data |
Numbers are defined by DMX connectors
| Number | Purpose | Wire colour |
|---|---|---|
| 1 | GND | |
| 2 | 5V | |
| 3 | Data |
1 2 3 4 5 6
Y
X
7
8
9
0
A B C D E F G H I J K L
| Nummer | Description |
|---|---|
| 1 | Water 100 % |
| 2 | Water 75 % |
| 3 | Water 50 % |
| 4 | Water 25 % |
| 5 | Water 15 % |
| 6 | GND |
| 7 | Temper Switch |
| 8 | GND |
| 9 | Leaf Sensor |
| 0 | Leaf Sensor |
| A | 5V |
| B | GND |
| C | Motion |
| D | 5V |
| E | GND |
| F | DS18B20 |
| G | 5V |
| H | GND |
| I | Soil Front |
| J | 5V |
| K | GND |
| L | Soil Back |
| X | GND |
| Y | Fontain Level |
| Topic | Payload | Comment |
|---|---|---|
| garden/waterbox/system | "startup" | Startup / Reboot |
| garden/waterbox/temperature | float | |
| garden/waterbox/humidity | float | |
| garden/irrigation/waterlevel | int 0..100 | |
| garden/irrigation/leaf | int 0..(2^10)-1 | |
| garden/irrigation/soilfront | int 0..(2^10)-1 | |
| garden/irrigation/soilback | int 0..(2^10)-1 | |
| garden/waterbox/door | "OPEN" / "CLOSE" | |
| garden/cellarentrance/motion | int | seconds since startup |
| garden/irrigation/tempdeep | float | 4k7 at the sensor |
| garden/irrigation/tempsurface | float | |
| garden/fontain/waterlevel | "OK" / "EMPTY" | Install pointing down |
| Topic | Payload |
|---|---|
| garden/fontain/pump | "on" / "off" |
| garden/fontain/light | "on" / "off" |
| garden/irrigation/rainpump | "on" / "off" |
| garden/irrigation/rel4 | "on" / "off" |
https://gist.github.com/lx-88/413b48ced6b79300ea76
http://wetter.bohlberg.de/wissen.php
https://www.snip2code.com/Snippet/574358/Arduino-function-to-read-a-Vegetronix-VH/