Prepare qcom-next based on tag 'Linux 6.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

Documentation/ABI/testing/configfs-stp-policy-p_ost

@@ -0,0 +1,6 @@
+What:		/config/stp-policy/<device>:p_ost.<policy>/<node>/entity
+Date:		Oct 2025
+KernelVersion:	6.18
+Description:
+		Set the entity which is to identify the source, RW.
+

Documentation/ABI/testing/sysfs-bus-coresight-devices-ctcu

@@ -0,0 +1,6 @@
+What:           /sys/bus/coresight/devices/<ctcu-name>/irq_threshold
+Date:           Dec. 2025
+KernelVersion:  6.19
+Contact:        Tingwei Zhang <[email protected]>; Jinlong Mao <[email protected]>; Jie Gan <[email protected]>
+Description:
+		(RW) Configure the IRQ value for byte-cntr register.

Documentation/ABI/testing/sysfs-bus-coresight-devices-cti

@@ -245,3 +245,14 @@ Date:           Aug 2025
 KernelVersion   6.18
 Contact:        Mao Jinlong <[email protected]>
 Description:    (Read) Show hardware context information of device.
+
+What:           /sys/bus/coresight/devices/<cti-name>/regs/ext_reg_sel
+Date:           Dec 2025
+KernelVersion:  6.19
+Contact:        Mao Jinlong <[email protected]>
+Description:    (RW) Select the index for extended registers.
+		QCOM CTI supports up to 128 triggers, there are 6 registers
+		need to be expanded to up to 4 instances:
+		CTITRIGINSTATUS, CTITRIGOUTSTATUS,
+		ITTRIGIN, ITTRIGOUT,
+		ITTRIGINACK, ITTRIGOUTACK.

Documentation/ABI/testing/sysfs-bus-coresight-devices-tgu

@@ -0,0 +1,51 @@
+What:		/sys/bus/coresight/devices/<tgu-name>/enable_tgu
+Date:		December 2025
+KernelVersion	6.18
+Contact:	Jinlong Mao <[email protected]>, Songwei Chai <[email protected]>
+Description:
+		(RW) Set/Get the enable/disable status of TGU
+		Accepts only one of the 2 values -  0 or 1.
+		0 : disable TGU.
+		1 : enable TGU.
+
+What:		/sys/bus/coresight/devices/<tgu-name>/step[0:7]_priority[0:3]/reg[0:17]
+Date:		December 2025
+KernelVersion	6.18
+Contact:	Jinlong Mao <[email protected]>, Songwei Chai <[email protected]>
+Description:
+		(RW) Set/Get the sensed signal with specific step and priority for TGU.
+
+What:		/sys/bus/coresight/devices/<tgu-name>/step[0:7]_condition_decode/reg[0:3]
+Date:		December 2025
+KernelVersion	6.18
+Contact:	Jinlong Mao <[email protected]>, Songwei Chai <[email protected]>
+Description:
+		(RW) Set/Get the decode mode with specific step for TGU.
+
+What:		/sys/bus/coresight/devices/<tgu-name>/step[0:7]_condition_select/reg[0:3]
+Date:		December 2025
+KernelVersion	6.18
+Contact:	Jinlong Mao <[email protected]>, Songwei Chai <[email protected]>
+Description:
+		(RW) Set/Get the next action with specific step for TGU.
+
+What:		/sys/bus/coresight/devices/<tgu-name>/step[0:7]_timer/reg[0:1]
+Date:		December 2025
+KernelVersion	6.18
+Contact:	Jinlong Mao <[email protected]>, Songwei Chai <[email protected]>
+Description:
+		(RW) Set/Get the timer value with specific step for TGU.
+
+What:		/sys/bus/coresight/devices/<tgu-name>/step[0:7]_counter/reg[0:1]
+Date:		December 2025
+KernelVersion	6.18
+Contact:	Jinlong Mao <[email protected]>, Songwei Chai <[email protected]>
+Description:
+		(RW) Set/Get the counter value with specific step for TGU.
+
+What:		/sys/bus/coresight/devices/<tgu-name>/reset_tgu
+Date:		December 2025
+KernelVersion	6.18
+Contact:	Jinlong Mao <[email protected]>, Songwei Chai <[email protected]>
+Description:
+		(Write) Write 1 to reset the dataset for TGU.

Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda

@@ -0,0 +1,50 @@
+What:		/sys/bus/coresight/devices/<tpda-name>/trig_async_enable
+Date:		October 2025
+KernelVersion:	6.19
+Contact:	Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]>
+Description:
+		(RW) Enable/disable cross trigger synchronization sequence interface.
+
+What:		/sys/bus/coresight/devices/<tpda-name>/trig_flag_ts_enable
+Date:		October 2025
+KernelVersion:	6.19
+Contact:	Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]>
+Description:
+		(RW) Enable/disable cross trigger FLAG packet request interface.
+
+What:		/sys/bus/coresight/devices/<tpda-name>/trig_freq_enable
+Date:		October 2025
+KernelVersion:	6.19
+Contact:	Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]>
+Description:
+		(RW) Enable/disable cross trigger FREQ packet request interface.
+
+What:		/sys/bus/coresight/devices/<tpda-name>/freq_ts_enable
+Date:		October 2025
+KernelVersion:	6.19
+Contact:	Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]>
+Description:
+		(RW) Enable/disable the timestamp for all FREQ packets.
+
+What:		/sys/bus/coresight/devices/<tpda-name>/global_flush_req
+Date:		October 2025
+KernelVersion:	6.19
+Contact:	Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]>
+Description:
+		(RW) Set global (all ports) flush request bit. The bit remains set until a
+		global flush request sequence completes.
+
+What:		/sys/bus/coresight/devices/<tpda-name>/cmbchan_mode
+Date:		October 2025
+KernelVersion:	6.19
+Contact:	Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]>
+Description:
+		(RW) Configure the CMB/MCMB channel mode for all enabled ports.
+		Value 0 means raw channel mapping mode. Value 1 means channel pair marking mode.
+
+What:		/sys/bus/coresight/devices/<tpda-name>/port_flush_req
+Date:		October 2025
+KernelVersion:	6.19
+Contact:	Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]>
+Description:
+		(RW) Configure the bit i to requests a flush operation of port i on the TPDA.

Documentation/ABI/testing/sysfs-class-reboot-mode-reboot_modes

@@ -0,0 +1,39 @@
+What:		/sys/class/reboot-mode/<driver>/reboot_modes
+Date:		August 2025
+KernelVersion:	6.17.0-rc1
+Contact:	[email protected]
+		Description:
+		This interface exposes the reboot-mode arguments
+		registered with the reboot-mode framework. It is
+		a read-only interface and provides a space
+		separated list of reboot-mode arguments supported
+		on the current platform.
+		Example:
+		 recovery fastboot bootloader
+
+		The exact sysfs path may vary depending on the
+		name of the driver that registers the arguments.
+		Example:
+		 /sys/class/reboot-mode/nvmem-reboot-mode/reboot_modes
+		 /sys/class/reboot-mode/syscon-reboot-mode/reboot_modes
+		 /sys/class/reboot-mode/qcom-pon/reboot_modes
+
+		The supported arguments can be used by userspace
+		to invoke device reset using the reboot() system
+		call, with the "argument" as string to "*arg"
+		parameter along with LINUX_REBOOT_CMD_RESTART2.
+		Example:
+		 reboot(LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2,
+		        LINUX_REBOOT_CMD_RESTART2, "bootloader");
+
+		A driver can expose the supported arguments by
+		registering them with the reboot-mode framework
+		using the property names that follow the
+		mode-<argument> format.
+		Example:
+		 mode-bootloader, mode-recovery.
+
+		This attribute is useful for scripts or initramfs
+		logic that need to programmatically determine
+		which reboot-mode arguments are valid before
+		triggering a reboot.

Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml

@@ -28,19 +28,32 @@ select:
   properties:
     compatible:
       contains:
-        const: arm,coresight-dynamic-funnel
+        enum:
+          - arm,coresight-dynamic-funnel
+          - arm,coresight-cpu-funnel
   required:
     - compatible
 
 allOf:
   - $ref: /schemas/arm/primecell.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,coresight-cpu-funnel
+    then:
+      required:
+        - power-domains
+
 properties:
   compatible:
-    items:
-      - const: arm,coresight-dynamic-funnel
-      - const: arm,primecell
-
+    oneOf:
+      - items:
+          - const: arm,coresight-dynamic-funnel
+          - const: arm,primecell
+      - items:
+          - const: arm,coresight-cpu-funnel
   reg:
     maxItems: 1
 

Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml

@@ -28,18 +28,32 @@ select:
   properties:
     compatible:
       contains:
-        const: arm,coresight-dynamic-replicator
+        enum:
+          - arm,coresight-dynamic-replicator
+          - arm,coresight-cpu-replicator
   required:
     - compatible
 
 allOf:
   - $ref: /schemas/arm/primecell.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,coresight-cpu-replicator
+    then:
+      required:
+        - power-domains
+
 properties:
   compatible:
-    items:
-      - const: arm,coresight-dynamic-replicator
-      - const: arm,primecell
+    oneOf:
+      - items:
+          - const: arm,coresight-dynamic-replicator
+          - const: arm,primecell
+      - items:
+          - const: arm,coresight-cpu-replicator
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml

@@ -29,18 +29,32 @@ select:
   properties:
     compatible:
       contains:
-        const: arm,coresight-tmc
+        enum:
+          - arm,coresight-tmc
+          - arm,coresight-cpu-tmc
   required:
     - compatible
 
 allOf:
   - $ref: /schemas/arm/primecell.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,coresight-cpu-tmc
+    then:
+      required:
+        - power-domains
+
 properties:
   compatible:
-    items:
-      - const: arm,coresight-tmc
-      - const: arm,primecell
+    oneOf:
+      - items:
+          - const: arm,coresight-tmc
+          - const: arm,primecell
+      - items:
+          - const: arm,coresight-cpu-tmc
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/arm/psci.yaml

@@ -98,6 +98,27 @@ properties:
       [1] Kernel documentation - ARM idle states bindings
         Documentation/devicetree/bindings/cpu/idle-states.yaml
 
+  reboot-mode:
+    type: object
+    $ref: /schemas/power/reset/reboot-mode.yaml#
+    unevaluatedProperties: false
+    properties:
+      # "mode-normal" is just SYSTEM_RESET
+      mode-normal: false
+    patternProperties:
+      "^mode-.*$":
+        minItems: 1
+        maxItems: 2
+        description: |
+          Describes a vendor-specific reset type. The string after "mode-"
+          maps a reboot mode to the parameters in the PSCI SYSTEM_RESET2 call.
+
+          Parameters are named mode-xxx = <type[, cookie]>, where xxx
+          is the name of the magic reboot mode, type is the lower 31 bits
+          of the reset_type, and, optionally, the cookie value. If the cookie
+          is not provided, it is defaulted to zero.
+          The 31st bit (vendor-resets) will be implicitly set by the driver.
+
 patternProperties:
   "^power-domain-":
     $ref: /schemas/power/power-domain.yaml#
@@ -137,6 +158,15 @@ allOf:
       required:
         - cpu_off
         - cpu_on
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: arm,psci-1.0
+    then:
+      properties:
+        reboot-mode: false
 
 additionalProperties: false
 
@@ -260,4 +290,17 @@ examples:
         domain-idle-states = <&cluster_ret>, <&cluster_pwrdn>;
       };
     };
+
+  - |+
+
+    // Case 5: SYSTEM_RESET2 vendor resets
+    psci {
+      compatible = "arm,psci-1.0";
+      method = "smc";
+
+      reboot-mode {
+        mode-edl = <0>;
+        mode-bootloader = <1 2>;
+      };
+    };
 ...

Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml

@@ -39,6 +39,16 @@ properties:
     items:
       - const: apb
 
+  interrupts:
+    items:
+      - description: Byte cntr interrupt for the first etr device
+      - description: Byte cntr interrupt for the second etr device
+
+  interrupt-names:
+    items:
+      - const: etr0
+      - const: etr1
+
   label:
     description:
       Description of a coresight device.
@@ -60,13 +70,20 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     ctcu@1001000 {
         compatible = "qcom,sa8775p-ctcu";
         reg = <0x1001000 0x1000>;
 
         clocks = <&aoss_qmp>;
         clock-names = "apb";
 
+        interrupts = <GIC_SPI 270 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "etr0",
+                          "etr1";
+
         in-ports {
             #address-cells = <1>;
             #size-cells = <0>;